So I started with Viagara and that worked for a bit, once it stopped working I moved to TriMix. I’ve moved through several formulas of TriMix and I’ve never had great results. I’m now using the following formula: PAP30/PHE3/PGE200
Recently I started applying a ring when I inject which has helped a bit, but not enough.
I inject at roughly 3ish o’clock....am I doing this wrong?
I gotta be doing this wrong...
Re: I gotta be doing this wrong...
Welcome to the forum.
When you listed your tri-mix formula, if that's 30/3/200 per ML, then you're already using some pretty potent stuff.
As for doing it wrong or right, if you've been doing it for awhile and your results have been consistent I'd guess your technique is OK. If your results are inconsistent, with some excellent results, then injection technique might be an issue. 3 o'clock is fine. Actually 2 to 4 or 10 to 8 is fine if you aim to the center of your dick but 3 or 9 is most commonly suggested. How many times have you injected? What length needle are you using? Have you watched any injection videos? Did your doctor do a demonstration injection in his/her office?
When you listed your tri-mix formula, if that's 30/3/200 per ML, then you're already using some pretty potent stuff.
As for doing it wrong or right, if you've been doing it for awhile and your results have been consistent I'd guess your technique is OK. If your results are inconsistent, with some excellent results, then injection technique might be an issue. 3 o'clock is fine. Actually 2 to 4 or 10 to 8 is fine if you aim to the center of your dick but 3 or 9 is most commonly suggested. How many times have you injected? What length needle are you using? Have you watched any injection videos? Did your doctor do a demonstration injection in his/her office?
R.R.P 2011 Mayo Jacksonville, Dr. M. Wehle. Not nerve sparing. C in margins. Radiation 2023, V.E.D, Viagra and PGE-1 (80mcg/ml) injections @ 8 - 14 units. Originally Edex20, then compounded PGE due to cost. Inject. 12 yrs. It works. Treasure coast of FL.
Re: I gotta be doing this wrong...
I am thinking you mean 30/3/20. And for me if i hurry i often miss
edex and tri mix 45/1/27 26 units
-
- Posts: 2
- Joined: Mon Jul 06, 2020 10:06 am
Re: I gotta be doing this wrong...
Thanks guys. It feels good that I’m not the only one that misses. I use the auto injector and I truly feel like I’m doing it right, I’m just shocked and saddened I’m not getting much of a result. I’m going to try the 8 or 10 position next time.
Re: I gotta be doing this wrong...
Unless there is a reason you have to use an auto injector I'd try doing it manually for awhile. Injecting manually you can have much better feel for determining if you're positioned properly. Watch some injection tutorials. I did a very unprofessional injection demo video I might be able to PM you a link for if you wish.If you want it let me know. Another user did a fairly professional injection video that is or was posted on a porn site but I don't have the link. It's posted in a thread on this site somewhere. I determine placement by pain and or syringe plunger resistance. If in the correct spot the plunger should depress fairly easily and without much pain. You cant feel that with an auto injector. I use 5/16 needles buried to the nub, with the nub indenting my skin. I have a very strong mix so I have to inject very slowly or I experience pain. If I Inject very slowly in little pulses I have no pain issues. Some guys do great with an auto injector but you should probably learn position and depth better first.
Good luck.
Good luck.
R.R.P 2011 Mayo Jacksonville, Dr. M. Wehle. Not nerve sparing. C in margins. Radiation 2023, V.E.D, Viagra and PGE-1 (80mcg/ml) injections @ 8 - 14 units. Originally Edex20, then compounded PGE due to cost. Inject. 12 yrs. It works. Treasure coast of FL.
Re: I gotta be doing this wrong...
When I used it, my tunica is very hard. Autoinject would bend the needle. To inject I stabbed the needle in till it hit the tunica. Then I would prepare myself and stab again. The lift out on the plunger till I see blood in the syringe. I know I am there, then I inject mix slowly. Unfortunately I was allergic to PGE-1 and started to get peyronie's.
82, good health, RP 7-2017, all nerves taken , PSA 0.05, 4-18,, .07 1/19,.05 4/19, .03 11-21, .04 11-23, implanted 4-1-18, Infra-pubic, AMS lgx 15 cm with 5cm rte. Implant at USC Keck. Dr Boyd and Dr Loh Doyle 6.5 x 5, 800 AUS 7-21-20
Re: I gotta be doing this wrong...
PhilipRiversSon wrote:Thanks guys. It feels good that I’m not the only one that misses. I use the auto injector and I truly feel like I’m doing it right, I’m just shocked and saddened I’m not getting much of a result. I’m going to try the 8 or 10 position next time.
When I was using Trimix and Quadmix it was always with an auto injector. I was told 11 or 1 were the two spots to aim for. I know I missed the spot a few times, but would still get a fair erection. But after using Trimix for a couple years it became unreliable. Moved to Quadmix which was good for one fill and by the time that was gone it was getting unreliable again. On both I had to keep increasing the dosage until the side effects did me in. Pain all down my shaft the next day. That's when it was time to talk implant.
Nov. 8, 2019
4+ years, Coloplast Titan OTR
Married 36 years to my beautiful young bride
Always here to answer questions if you PM me
4+ years, Coloplast Titan OTR
Married 36 years to my beautiful young bride
Always here to answer questions if you PM me
-
- Posts: 7
- Joined: Sat Dec 14, 2019 12:23 am
Re: I gotta be doing this wrong...
When I first started this they gave me an auto injector. I was having problems with missing the spot. It was bulky and I knew that I was in the right spot but kept missing. Couldn’t figure it out until I loaded a needle and watch it come out. It was coming out to the very side of the injector not straight out. Got another one and it did the same thing. So I started to just use the needle itself and have jade very few problems. I am right handed so doing really left side and using a mirror is a little tough but patience is a virtue. After my experience with them I would NEVER recommend one. Everyone is different so do what’s more comfortable to you. Best of luck.
Who is online
Users browsing this forum: No registered users and 75 guests