FrankTalk.org

Hello guys---I have an Autoject 2, the blue one, and noticed a difference between the depth the needle goes when set per the instructions that came with it and what is suggested by members of this group when giving manual injections.

With the depth set per the instrucktions the needle, when inserted by the autojector (using a 1/2 inch needle) only about half the needle goes into the penis.

Members on this forum suggest that when you manually inject you insert the needle all the way to the nub, especially with a 5/16 inch needle. I am wondering if maybe I should just set the depth gauge so the nubs on both needles only come to just inside the opening when injected by the autoject.

If anyone has had similar experiences with this injector I would like to hear from you.

You need to go in at least 5/16 inch to be sure you pierce the tunica wall.

DT--Thanks for the input. If I set the depth per instructions the 1/2 inch needle will give the depth needed even though it does not go into my cock all the way. I also have 5/16 inch needles that will work in the injector but as stated, they only go in about half way. SO, since I always insert the needles to the nub when manually injecting I will just adjust the depth on the injector to insure both go all the way to the nub.

Use the little yellow guage forget the markings i marked 5/16 and 1/2 inch put a used needle fire it and measure with yellow guage