Please Help - Inconsistent Results

[Julios]

I'm having some trouble using Trimix. Ive been using it now for 7 weeks. I have found that a dosage a little as 0.075 ml works great for me; sometimes. Sometimes it produces an erection like steel for 2 or 3 hours. But other times it produces nothing. I did 0.09 ml once with no results. Another time 0.08 gave me an erection that lasted 4.5 hours even with Sudafed and ice - scary.

Does this happen to anyone else? Does anyone know why this is happening, and how to get results more consistent? As far as I can tell, there is no significant difference in eating or drinking patterns. I try to vary the injection location slightly each time to reduce risk of fibrosis, but always in the same general area; near the base and at 3:00 and 9:00 positions. Im using a 1/2 inch, 30 gauge needle.

I'd sure appreciate any help out there. Thanks.

[Julios]

Scott, thanks. It helps knowing it's not just me. Since my post I've gotten a little better results by squeezing my dick at the injection point for a minute or two. Also, don't go too far in. If you use 1/2" needles don't go all the way in. I've started keeping a detailed log of procedure and results. It's a real science!

[TheNordic]

Gentlemen - let's talk !

Inconsistent Tri Mix. Getting thru Universal Men's Clinic @ about $23- a pop. (pre-filled syringes 4 at a time "on demand")

Using Autoject - needle on 'C' depth.

My Results in 10 - 15 or so endeavors;

From over the top - once ! (Sudafed and hot bath or cold bath ??) UMC said warm bath or compress ...)

to;

About perfect: once or twice.

to;

Nothing at all: All too often ! (especially on 'big' nights I really want to perform, if you know what I mean ...)

Where to inject: 2 fingers from base at 2 - 3 O'Clock or 9 - 10 O'Clock.

Autoject vs. Manual ?

Sometimes takes 10 - 30 seconds to fully inject !! Sprays out all over if I pull out the needle too soon and don''t watch the window....

To Freeze or Refrigerate ? That is the Question.

[Rickey11]

I'm having some trouble using Trimix. Ive been using it now for 7 weeks. I have found that a dosage a little as 0.075 ml works great for me; sometimes. Sometimes it produces an erection like steel for 2 or 3 hours. But other times it produces nothing. I did 0.09 ml once with no results. Another time 0.08 gave me an erection that lasted 4.5 hours even with Sudafed and ice - scary.

Does this happen to anyone else? Does anyone know why this is happening, and how to get results more consistent? As far as I can tell, there is no significant difference in eating or drinking patterns. I try to vary the injection location slightly each time to reduce risk of fibrosis, but always in the same general area; near the base and at 3:00 and 9:00 positions. Im using a 1/2 inch, 30 gauge needle.

I'd sure appreciate any help out there. Thanks.

HI, I have been taking trimix successfully for just over a year. It took me 13 tries before I started to dial it all in. First I had to get the location correct, as you MUST hit the corpus, and that is NOT an easy job to do this consistently. It helps to plump your pecker up with a pump, as it makes hitting the target much easier, and it will go in the 1/2 inch without going too far.
Once you get the injection site correct on a regular basis, then it's time for getting the dosage right. Start low and progress .02 ml at a time until you get at least an hour of wood.
The main problem is getting the injection site correct, as sometimes the tunica can cause the needle to veer off and away from the corpus.
Now I can adjust the dosage to where I can have an erection for 1 to 4 hours, depending upon the need.

[TheNordic]

I have had the same results; from absolutely nothing (maybe a bit "full feeling" to over the top super rock hard and lasted way too long to the point of "scary". (side note: my wife thinks often has been "too hard to feel natural", so I need to dial mine back a bit too. At this point, I think it's the mix itself since each batch has varied so much. Was using an "Autoject 2" -- not a good tool for your tool. That is next to impossible to use one handed. The "Inject Ease" is MUCH better and easy for a one handed operation. Thinking however to go freestyle for even better insertion and accuracy .... even going so far as to inject on BOTH sides since the pain is next to nothing.