Gt1956 wrote:I had my 3 month post op exam today. Well actually 3 1/2 months due to scheduling issues. I had this very discussion with my dr. I even think that he brought up the subject. He says a ved post surgery is ok. All basic rules apply as to pressure limits. Absolutely no rings.
Since newbie443 & I have both commented on the length grow possibilities of the implants in the one study where they were inflated to 20 psi. I asked if men can generate 20 psi using the pumps. He claimed that most men can only get around 12 psi. He say that because of experience & such. He can get to 14 psi. I guess that really dedicated patients could probably match that. So looks like that is a factor to use when interpreting the studies data.
He did divulge some other info that I'll try to put into the appropriate threads over the next day or two.
Watch for my posts. Some info is interesting.
If you or others look at that study https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5654325/ Table one indicates a fair amount of gain for the LGX at 10 and 15 psi. On the other hand the Titan shows almost no gains at those lower pressures. So if the Titan does not expand and VED use post op does expand tissue. Will the result be floppy glans? Again is the LGX the only device that should be used with post op ved? Or maybe the Rigicon device if it does expand also. And maybe also exclude the CX. I have seen no date on the CX expansion. I can only guess that the only gains that would be possible would be in girth. The above study did show very minor girth gains for the LGX at those lower pressures and again basically none for the Titan at those levels.
On another note, my LGX with MS pump seems to have a bypass in it. That is after I pump up to max if I continue to pump or force pumps it seems to bypass the cylinders. I am depressing the bulb and forcing fluid out of it but it is not going into my cylinders. If I wait for some stretching to occur, then I can get a few more partial pumps that move fluid into the cylinders until the bypass again happens. I can pump in the bypass forever. I can tell the difference in those pumps also and now I just stop when I reach that point. If the MS pump does have a bypass function then the question is what PSI is it set at.