VED TUBE SIZES

[DougAnd]

When we talk about VED tube sizes just keep in mind that a 2 inch tube has a 6 inch girth. It is also 7 inches long which is enough for most guys. My 2.5 inch tube can handle more than 7 3/4 inches of girth. I bought a 3 inch tube just for jollies and giggles. No way to keep everything from sliding in. To the trash can batman!

[Musson]

I have a 6 inch girth ( slightly less now due to PD) and I max out the standard 2 inch tube so much so that sometimes I have to give it a hard pull to remove it.

[Cnidium]

When we talk about VED tube sizes just keep in mind that a 2 inch tube has a 6 inch girth. It is also 7 inches long which is enough for most guys. My 2.5 inch tube can handle more than 7 3/4 inches of girth. I bought a 3 inch tube just for jollies and giggles. No way to keep everything from sliding in. To the trash can batman!

I'm trying to find the right cylinder size. 6.5"girth at base, 2in diameter. I'm thinking a 2.25 diameter cylinder will work.

By the way, Hakky highly recommended that I use VED while fully pumped. Interesting to hear his perspective.

[azmike]

The following is a post from a member of another men’s forum:

“Selecting Your Cylinder Size

Selecting the proper cylinder size is important for making your pumping sessions both comfortable and rewarding. Your cylinder should be large enough to allow for significant expansion, but not so large as to make it easy for your testicles to be drawn into the cylinder by the vacuum.

When selecting length, choose a cylinder that is between 1 and 2 inches longer then your bone pressed erect length.

For selecting diameter, use the table below using your erect girth near the base. Usually the largest erect girth measurement is near the base but if your largest girth is midshaft or your glans girth, use the larger measurement to pick your cylinder diameter.

Base Girth Cylinder Diameter
3.50 to 4.50* 1.50
4.75 to 5.25* 1.75
5.50 to 6.00* 2.00
6.25 to 6.75* 2.25
7.00 to 7.50* 2.50
7.75 to 8.25* 2.75

[oldbeek]

How are you supposed to get the right size? I thought I sized correctly, but my tube allows too much scrotal skin to be pulled in. I plan to get one of those sleeves

Get a silicone cushion from CalXotics it works great

[oldbeek]

How are you supposed to get the right size? I thought I sized correctly, but my tube allows too much scrotal skin to be pulled in. I plan to get one of those sleeves

Get a silicone cushion from CalXotics it works great

Any links or directions where to buy them?

simplipleasures.com click men. look for VED devices. optimal silicon ring

[GeorgeSpiteful]

Regarding VED tube sizes, you must ensure you're using the right one for a comfortable fit and to get the best results. The tube size depends on the circumference you're working with, and you want to keep everything tight enough and loose.