Deflation issues titan touch
Posted: Wed Nov 30, 2016 9:05 am
Started a journal shortly after I decided to do the surgery on Sept 6th, 2016. To summarize, its been a huge learning curb for me, possibly because I didn't research on my own thoroughly and maybe my doctor is more of a surgeon than an educator.
At any rate, I have overcome some initial difficulties with the inflation. I have the technique down and the bulb has seemingly softened. At this point I've been experiencing difficulty with deflation. I have been getting some guidance from several posters on the forum who I reached out to after noticing some similar issues on old posts they wrote.
In a nutshell (no pun intended) I am still trying to identify how much residual fluid normally remains in the tubes so that I am not chasing an unrealistic result. For me, right now, I feel like I'm doing too much work, squeezing and trying to direct fluid downward from the head and it's not cooperating; its wanting to come back as if there is nowhere for it to go or the "drain" is not completely open (to use an analogy.)
Regarding soreness in the head, it is uncomfortable at times when my dick is standing straight in my underwear and in certain seated positions the fabric tightens to press it straight back into my crotch. I attribute this to feeling too full of fluid. For me, it feel like the penis is lined with rigid but bendable cartilage (somewhat like my normal erect penis when I was functioning optimally.)
Contrasting this description; I have read some posters describe that they flatten their penis "like a pancake" or a "flattened tire tube" and they do it within 8 seconds or so.
Some posters also describe that they are pressing the button while squeezing.
I'll have to get to where I can do that because so far I am giving a strong squeeze for 5 seconds and then releasing the thumb and middle finger while I squeeze. If I don't use my free had to secure the cylinder while I am squeezing it will slip from between my fingers. Perhaps I am squeezing too hard but that's because the doctor and other posters indicated it takes a hard squeeze to activate the titan touch deflation button (and for at least 5 seconds.) Further, my doctor told me that once I activated the deflation button I could release the cylinder and begin squeezing with both hands.
PS:
It just so happens I got a pretty good deflation last night. Don't ask me how. I was just experimenting.
One poster actually suggested I try squeezing and pressing on the bulb one time. I did it and then I squeezed what I thought was the wrong part of the cylinder and somehow I got a better deflation than I have ever had!
The penis sort of flopped over like a rag. I never thought I would be so happy with that result! Anyhow I have hope that I'm getting closer though I still have no idea what method I used to attribute to my success!
My guess is that either the simultaneous squeeze and bulb compression worked to activate the deflation button OR I was never squeezing the proper ends of the cylinder in the first place. A third possibility comes to mind; possibly the squeeze I performed on the cylinder itself (albeit not on the button end) caused the deflation button to activate.
At any rate, I have overcome some initial difficulties with the inflation. I have the technique down and the bulb has seemingly softened. At this point I've been experiencing difficulty with deflation. I have been getting some guidance from several posters on the forum who I reached out to after noticing some similar issues on old posts they wrote.
In a nutshell (no pun intended) I am still trying to identify how much residual fluid normally remains in the tubes so that I am not chasing an unrealistic result. For me, right now, I feel like I'm doing too much work, squeezing and trying to direct fluid downward from the head and it's not cooperating; its wanting to come back as if there is nowhere for it to go or the "drain" is not completely open (to use an analogy.)
Regarding soreness in the head, it is uncomfortable at times when my dick is standing straight in my underwear and in certain seated positions the fabric tightens to press it straight back into my crotch. I attribute this to feeling too full of fluid. For me, it feel like the penis is lined with rigid but bendable cartilage (somewhat like my normal erect penis when I was functioning optimally.)
Contrasting this description; I have read some posters describe that they flatten their penis "like a pancake" or a "flattened tire tube" and they do it within 8 seconds or so.
Some posters also describe that they are pressing the button while squeezing.
I'll have to get to where I can do that because so far I am giving a strong squeeze for 5 seconds and then releasing the thumb and middle finger while I squeeze. If I don't use my free had to secure the cylinder while I am squeezing it will slip from between my fingers. Perhaps I am squeezing too hard but that's because the doctor and other posters indicated it takes a hard squeeze to activate the titan touch deflation button (and for at least 5 seconds.) Further, my doctor told me that once I activated the deflation button I could release the cylinder and begin squeezing with both hands.
PS:
It just so happens I got a pretty good deflation last night. Don't ask me how. I was just experimenting.
One poster actually suggested I try squeezing and pressing on the bulb one time. I did it and then I squeezed what I thought was the wrong part of the cylinder and somehow I got a better deflation than I have ever had!
The penis sort of flopped over like a rag. I never thought I would be so happy with that result! Anyhow I have hope that I'm getting closer though I still have no idea what method I used to attribute to my success!
My guess is that either the simultaneous squeeze and bulb compression worked to activate the deflation button OR I was never squeezing the proper ends of the cylinder in the first place. A third possibility comes to mind; possibly the squeeze I performed on the cylinder itself (albeit not on the button end) caused the deflation button to activate.