Imjecting with poor vision

[wgs743]

I have poor eyesight, This makes it difficult to judge where I am sticking myself.
Anyone have suggestions on how to hit the right locatiln?

[flyingduck2019]

WGS743---A couple of questions: 1. Are you single or married? 2. If married, will your wife do the injection for you? 3. If you have a partner (not a wife) will they do it for you? That can be part of the foreplay and can be very pleasureable and a turn-on.

If you are alone and have no one to do the injection you might try this: You know where the injection spots are supposed to be, 3 oclock and 9 oclock. Take the time and really get to know your cock. Feel your shaft and by finger widths get to know when your finger edge or thumb edge is at the correct spot. Get a autoinjector that you can use your syringes and needles with. Then you can just place the end of the autoinjector next to the finger or thunb and push the release button. Instantly, you will have injected in the right spot.

Now, the above is just my idea of a way to help you. Maybe there is a better way and maybe others on this forum will chime in and offer their help as well.

Good luck and let me know how it goes.

[limpbiscuit]

When grasping your cock, place your index finger on the urethra, the spongy tube at the bottom of the shaft. That is the 6:00 position Rest your thumb on the top of the cock. You should be able to feel a ligament under the thumb. That is the 12:00 position. Looking from the top, midway between thumb and index finger on the right is 3:00. Midway between thumb and index finger on the left is 9:00 Injecting half way between 12 and three or 12 and nine is what your'e aiming for.

My experience is injecting about closer to the base is less painful than injecting closer to the head.

[Stew52]

I have found that injecting when the unit it plumped up at least halfway is best. That also gets the surface veins bulging a bit more and easier to see and increases the cavernosa giving a more identifiable bigger target between the top and bottom bundles (that you want to avoid). I've hit the urethra once and had TriMix dribbling out the end. I shouldalso not be big and throbbing as you get more of a bruise/bleed. Taking time and good light is key and wearing glasses if you wear them. My two bad misfires were rushed and in bad light. I rarely even get a pinpoint of blood or bruise now.

[flyingduck2019]

A high intensity light (gooseneck) might also help. It would definitely light up the cock. Just another idea.

[once a writer]

A high intensity light (gooseneck) might also help. It would definitely light up the cock.

I do this, and it makes a huge difference in the injection process.

[limpbiscuit]

Wow, using a gooseneck lamp. I hadn't thought of that.

And for those of us who are a bit on on the wooly side, doing a bit of manscaping makes the whole area more visible.

So, with all this, it's also important to vary the site of injection from one shot to the next. Right side, left side and the like. and following the advice here, different distances from the body as fits your anatomy. I have a number of veins and arteries mid-shaft that effect where I can inject. We want to miss veins and capillaries to reduce blood leakage and bruising.

[KenJ1947]

A high intensity light (gooseneck) might also help. It would definitely light up the cock.

I do this, and it makes a huge difference in the injection process.

I use a lamp and large mirror above my sink. With the mirror, you have to deal with the reverse image adjustment. Also, as a reminder, you should try to maintain a 90º angle wherever you inject.

Hope that helps.

[KenJ1947]

Sorry, I'm working from my phone so I couldn't edit my post. The 90º angle is the needles position to your penis. You want to hit the center of your corpus. I didn't hold that angle a couple of times and missed with horrible results.

[Agfa13]

Yep, get to know your cock! I don't mean that in a salacious way either!
You may also want to DM Whitecane, as he is totally blind (if I remember correctly).
He has an implant already, but he may be able to help you. Good luck!