Pumping frustration

The final frontier. Deciding when, if and how.
Dlareg
Posts: 25
Joined: Thu Nov 18, 2021 6:22 am

Pumping frustration

Postby Dlareg » Sat Mar 26, 2022 9:31 am

Five weeks post op and got the go ahead to start cycling. My expectations were to be able to pump to a point where stretching would occur and discomfort would be noticeable. That's not my reality. I pump to a point of a semi hard on and that's where it stops. The bulb will be super hard to the point of unable to squeeze. Move the penis up down left right for a couple minutes then get a couple more squeezes. Repeat this process several times and always able to get a couple more squeezes in, but there seems to be no further inflation. Any thoughts?
AMS 700 18cm +2 rte Feb 2022 (under sized)
Titan 20cm +2 rte Jul 2022
59 yo, married since 1985
Ed since 2009, pills, injections both worked until they didn't.

Lil Willy
Posts: 58
Joined: Tue Jan 11, 2022 6:14 pm

Re: Pumping frustration

Postby Lil Willy » Sat Mar 26, 2022 9:50 am

Patience, Patience,. I got my AMS. 700 C X Dec 31. Just now pump is working well. Many posts or threads here on the forum about the same issue. Great place for information, another better one is the company representative. Call Boson Scientific leave a message to find your area rep. Be prepared to wait for a while, he or she will return your call and answer questions about the device. Will not answer questions about the medical or physical issues, they refer that back to your doc.

Again it takes time.
LIL. WILLY
70 years young, 50 years marriage to one awesome little lady. E D. Prostate cancer survivor. Pills and VED been there, done that. Recently implanted. AMS 700 CX. 100 CC Reservoir
Looking forward to a new journey.

newbie443
Posts: 1931
Joined: Fri Dec 01, 2017 9:41 pm
Location: Sedgwick county, Kansas USA

Re: Pumping frustration

Postby newbie443 » Sat Mar 26, 2022 10:04 am

Dlareg wrote:Five weeks post op and got the go ahead to start cycling. My expectations were to be able to pump to a point where stretching would occur and discomfort would be noticeable. That's not my reality. I pump to a point of a semi hard on and that's where it stops. The bulb will be super hard to the point of unable to squeeze. Move the penis up down left right for a couple minutes then get a couple more squeezes. Repeat this process several times and always able to get a couple more squeezes in, but there seems to be no further inflation. Any thoughts?


You should have received a protocol for cycling from your doctor. There is an example of one in your user DVD that was in your packet. Something like inflate to max and deflate once a day for a couple of days then twice a day for a few days then leave in flatted for 10 minutes for a few days then for 20 minutes for a few days and then eventually a set routine for out to months of your cycling. As we are all different and so are the doctors we use it is important to follows your doctors instructions. Dose not matter what others do. You can ask your doctor about this. And the use of longer inflations or adding (sometime called forced pumping) pumps. And even the use a VED. If your doctor ok's any of that then you can try it. If not I would wait until I was fully healed (3-6 months for most men) to try other methods of restoring lost size.

Right now you are early in this when the risk of infection is higher. The important thing as I see it is to heal and avoid infection. Your doctor is the one that did the surgery on you and has the most information to advise you with this.

Good luck going forward with this.
Injections failed. Implanted 3-21-18 AMS 700 LGX 21 + 1 RTE 100 cc reservoir 6.5" L 5" G Dr. Kramer.

Proximal Perforation Sling Repair 4/13/21 Dr. Broghammer

66 years young.

Will show and tell and talk with others.

2435tjklAS
Posts: 592
Joined: Tue Nov 30, 2021 10:17 pm

Re: Pumping frustration

Postby 2435tjklAS » Sat Mar 26, 2022 10:04 am

Completely normal. 5 weeks out seemed like nothing worked at all, pumping didn't make me more erect. Was 6 or 7 weeks out that it started working and I regained some length.
40. AMS 700 LGX, 21+3. Nov. 2, 2021. Idiot who abused alcohol for brain injury, abused viagra for implant.

Goal to prove implants increase dick size

Pre-op dick size: 8.75" x 5.7"

Current: 9-9.5" x 5.5"

Goal: 10+" x 6+"

gjmjoe017
Posts: 1055
Joined: Thu Apr 13, 2017 9:32 am
Location: NW Arkansas

Re: Pumping frustration

Postby gjmjoe017 » Sat Mar 26, 2022 10:17 am

Normal,be patient and keep at it!!
71 yrs.old married,ED for 7 yrs.Pills for 3 yrs,TriMix for 21/2 yrs.6 1/2 inches flacid,71/4 inches erect,6 inches girth.Coloplast Titan put in 11/13/20,Dr.Bozeman,Arkansas Urology,Little Rock.22cm + 2 RTE.

Dlareg
Posts: 25
Joined: Thu Nov 18, 2021 6:22 am

Re: Pumping frustration

Postby Dlareg » Sat Mar 26, 2022 8:17 pm

Thanks for the feedback. Will continue to give it my best.
AMS 700 18cm +2 rte Feb 2022 (under sized)
Titan 20cm +2 rte Jul 2022
59 yo, married since 1985
Ed since 2009, pills, injections both worked until they didn't.

portageriver
Posts: 118
Joined: Thu Feb 03, 2022 1:50 pm

Re: Pumping frustration

Postby portageriver » Sat Mar 26, 2022 9:08 pm

Yup - I posted several times about my frustration with the bloody stiff pump early on. I still remember the first week of cycling... exactly like your experience.

You received great feedback from your brothers, it is normal, keep at it! For me, after a full 30-days of daily cycling, I knew I made the right decision and started to relax. After assaulting that bulb/pump for like three months, I was all good. Still making small gains today...
Age 55, Ohio - Implant AMS 700 LGX, 21+ 3 following RAP for prostate cancer (Gleason 6). Implanted June 2021 and loving it!

Lost Sheep
Posts: 6162
Joined: Mon Jul 04, 2016 11:16 pm

Re: Pumping frustration

Postby Lost Sheep » Sun Mar 27, 2022 2:52 pm

When you have inflated as much as possible, press on the sides of the inflatable tubes in your penis. Are they as firm as the pump bulb?

Hydrostatics suggests that if there is equal pressure in the bulb as in the tubes, they should be equally firm, the only difference being the stiffness of the material of the pump bulb over the stiffness of the material of the implant.

With my AMS LGX, at any degree of inflation past 50%, the resistance I feel to my finger making a dent in the inflatable tubes is equal to making a dent in the pump bulb. (Below 50%, the greater stiffness of the pump bulb makes a difference.)
Lost Sheep
AMS LGX 18+3 Nov 6, 2017
Prostate Cancer 2023
READ OLD THREADS-ask better questions -better understand answers
Be part of your medical team
Document pre-op size-photos and written records
Pre-op VED therapy helps. Post-op is another matter

Pau1pau1
Posts: 149
Joined: Sun Dec 20, 2020 10:05 am

Re: Pumping frustration

Postby Pau1pau1 » Sun Mar 27, 2022 5:16 pm

I’m only activated 4 days , but boy does it hurt my sack.
My ball bag has started to swell again cause of all the pressure I have to press down on the pump.
Releasing it is the worst.
How long before the skin gets used to being pressed hard?

Lost Sheep
Posts: 6162
Joined: Mon Jul 04, 2016 11:16 pm

Re: Pumping frustration

Postby Lost Sheep » Sun Mar 27, 2022 10:54 pm

How long? Cycling the implant between 50 and 200 times. If you cycle once a day, maybe two months. Or 6 months, depending on how tough your skin is and how gently you do the pumping.

After 4 years, if I am not watchful, I can still make myself sore.

The upshot of this is that after only a short time, if you are observant of how you do the pumping, you can do it without hurting anything, even if it is a bit uncomfortable. Technique is key. Hold the valve body so your squeezing hand does not slip on your skin.
Lost Sheep
AMS LGX 18+3 Nov 6, 2017
Prostate Cancer 2023
READ OLD THREADS-ask better questions -better understand answers
Be part of your medical team
Document pre-op size-photos and written records
Pre-op VED therapy helps. Post-op is another matter


Return to “Implants”

Who is online

Users browsing this forum: Google [Bot], sputnik, tobenormalagain and 300 guests