Dick, how to measure?

The final frontier. Deciding when, if and how.
oldbeek
Posts: 2547
Joined: Sun Sep 10, 2017 1:46 pm
Location: Los Angeles area

Dick, how to measure?

Postby oldbeek » Wed Mar 21, 2018 10:51 pm

Last night I used bimix and thought this would be a good time to measure my length. I was 7 inch to the base before RP surgery. Now I am 6.25inch to the base. I can feel my shaft hard and swollen down between my legs. Overall shaft that gets ridged including part below my testicals is 9 inches. Would that be the overall length of the cylinders and rte extensions? Just wondering. Did I loose the 3/4 inch because my prostate used to take up 21 cm of space at the pile driver end of the shaft?
82, good health, RP 7-2017, all nerves taken , PSA 0.05, 4-18,, .07 1/19,.05 4/19, .03 11-21, .04 11-23, implanted 4-1-18, Infra-pubic, AMS lgx 15 cm with 5cm rte. Implant at USC Keck. Dr Boyd and Dr Loh Doyle 6.5 x 5, 800 AUS 7-21-20

Lost Sheep
Posts: 6163
Joined: Mon Jul 04, 2016 11:16 pm

Re: Dick, how to measure?

Postby Lost Sheep » Wed Mar 21, 2018 11:39 pm

oldbeek wrote:Last night I used bimix and thought this would be a good time to measure my length. I was 7 inch to the base before RP surgery. Now I am 6.25inch to the base. I can feel my shaft hard and swollen down between my legs. Overall shaft that gets ridged including part below my testicals is 9 inches. Would that be the overall length of the cylinders and rte extensions? Just wondering. Did I loose the 3/4 inch because my prostate used to take up 21 cm of space at the pile driver end of the shaft?

Measure from the pubic bone to the tip of the meatus (of course, you have to deal with the fat pad just above the penis by compressing it as much as possible). Measure in a straight line, not around the curve of the glans.

Measuring the under3side of the penis leaves too much variation from time to time on the same man and from man to man, also.

Overall length of the cylinder and rear tips and rear tip extensions and distal tips (yes, there are four length components to the penile implant proper) bears only a loose relationship to your penis length as seen outside the body. Approximately (APPROXIMTELY) 1/3 of the length of the implant will be buried in you pelvis. This varies from man to man depending on the shape of his pelvis and depth of his crus.

One can lose length from any number or reasons. Men who have had their prostate removed may have lost length because of surgical removal of some of their tissues. Others may lose length because scar tissue buildup prevents the full expansion/distension previously enjoyed. Scar tissue from Peyronie's disease, trauma (surgery or injury) or atrophy/shrinkage from lack of continuing daily/nightly erections. Some of these causes can be mitigated by use of a Vacuum Erection Device, but no documented length increases (over one's natural-born length) by any means other than some exotic surgeryies are known to be practical, or even possible.
Lost Sheep
AMS LGX 18+3 Nov 6, 2017
Prostate Cancer 2023
READ OLD THREADS-ask better questions -better understand answers
Be part of your medical team
Document pre-op size-photos and written records
Pre-op VED therapy helps. Post-op is another matter

Greg1956
Posts: 1736
Joined: Sun Aug 06, 2017 8:35 am
Location: Atlanta, GA USA

Re: Dick, how to measure?

Postby Greg1956 » Thu Mar 22, 2018 7:16 am

This is how to accurately measure your penis.
Attachments
65A4AD9C-A631-4E54-8700-7D1E3F451A87.jpeg
65A4AD9C-A631-4E54-8700-7D1E3F451A87.jpeg (54.65 KiB) Viewed 1912 times
I am 64 and had ED from a VL. Implanted by Dr. Ronald Anglade in Atlanta on 9/18/17. I have an AMS700LGX 21 cm via a Penoscrotal incision. Very happy with results. 6" soft and 6 3/4” x 5 5/8” hard.

MikeAN
Posts: 60
Joined: Wed Jun 28, 2017 3:55 am
Location: Texas USA

Re: Dick, how to measure?

Postby MikeAN » Thu Mar 22, 2018 8:36 am

Great graphic!
1950. Implanted November 1st 2017 by Dr Andrew Kramer with Titian 22cm + 2cm RTE. Pump relocated and replace with Classic pump Jan. 24th, 2018. Pump failure 12/18, Replaced 2/13/19 by Dr Kramer. Revision by Dr Clavell, Feb 28, 2024.

dg_moore
Posts: 1885
Joined: Mon Apr 25, 2011 9:34 am

Re: Dick, how to measure?

Postby dg_moore » Thu Mar 22, 2018 8:37 am

And, as I've mentioned before - use a metric rule: the numbers are much more impressive.
Dave, 80, Maryland - Implant (Titan) 2008 by Dr. Andrew Kramer (failed Sept 2020) - never used due to a stroke that, among other things, ended my sex life.
Life is not the way it's supposed to be, it's the way it is.

David_R
Posts: 2145
Joined: Mon Nov 02, 2015 1:03 pm

Re: Dick, how to measure?

Postby David_R » Thu Mar 22, 2018 10:03 am

MikeAN wrote:Great graphic!

Yes it is! Thanks for sharing it with us, Greg.

Larry10625

Re: Dick, how to measure?

Postby Larry10625 » Thu Mar 22, 2018 1:14 pm

dg_moore wrote:And, as I've mentioned before - use a metric rule: the numbers are much more impressive.



Right up to the point when you have to divide by 2.5 :(

Larry

dg_moore
Posts: 1885
Joined: Mon Apr 25, 2011 9:34 am

Re: Dick, how to measure?

Postby dg_moore » Thu Mar 22, 2018 2:06 pm

Larry10625 wrote:
dg_moore wrote:And, as I've mentioned before - use a metric rule: the numbers are much more impressive.



Right up to the point when you have to divide by 2.5 :(

Larry

That would spoil the effect!
Dave, 80, Maryland - Implant (Titan) 2008 by Dr. Andrew Kramer (failed Sept 2020) - never used due to a stroke that, among other things, ended my sex life.
Life is not the way it's supposed to be, it's the way it is.

Larry10625

Re: Dick, how to measure?

Postby Larry10625 » Thu Mar 22, 2018 2:46 pm

dg_moore wrote:
Larry10625 wrote:
dg_moore wrote:And, as I've mentioned before - use a metric rule: the numbers are much more impressive.



Right up to the point when you have to divide by 2.5 :(

Larry

That would spoil the effect!



Yup, I friggin hate that part :(

Larry


Return to “Implants”

Who is online

Users browsing this forum: Google [Bot], JackfromWA and 100 guests