PGE-1 mixing quantity

Sticking a needle Where? Courage, guidance and help.
aussiemale
Posts: 2
Joined: Wed Oct 17, 2018 5:33 pm

PGE-1 mixing quantity

Postby aussiemale » Sun Oct 21, 2018 7:46 pm

Hi
Am new to this forum and need your advice.

I have read everypost on the injection forum and i have a query on mixing.
I have recently acquired 10 vials of PGE-1 and have mixed it at 5mg of Bacteriostat Water to the 250 mcg vial of PGE-1

I started of very cautiously with 2.5mcg of product on my 1st injection with very little response eventually working up to 40 mcg of product very little response but felt something was happening.

What my main question is have i mixed this up too weak a dose .

Should i have mixed it 100 mcg to 1mg of Bat water instead of 50mcg to 1mg of water?
Does the mix strength have any bearing on the out come if the injected product amount is the same?

Injections appear to all be good and no trouble .

Not completely impotent and have excellent night time erection just want a good one when its needed.
Thanks.

User avatar
Stew52
Posts: 375
Joined: Fri Apr 13, 2018 4:22 pm
Location: Central TX

Re: PGE-1 mixing quantity

Postby Stew52 » Sun Oct 21, 2018 10:37 pm

Assuming you are doing all the math correctly, 40 mcg of PGE1 injected is pretty dang stout. Caverject, a PGE1 product comes in 10, 20 and 40 mcg syringes. I needed about 30 mcg to produce a hard boner, 10 mcg, my start, was ineffective and 20 marginal. The 30 mcg produces a bretty god burn in me also. Tri-Mixes typically have a dose of PGE1 of 20 mcg/ml and a typical dose of say 0.2-0.4 ml. That is only about 4-8 mcg of PGE1 together with the papavatrine and phentolamine. Some have higher PGE1, up to 100 mcg/ml but those guys report using a far lower dose. Ask around.

Frankly I'd recheck my math first. If correct, Id question the efficacy of the PGE1 powder. If all of that is good then Mono-MIx may not be effective or you need to ramp it up all UNDER your doctor's guidance. You are getting on thin ice.
NOT an MD. 72, M52 yrs, CenTX US. Inj since 12/2016, a yr after pills stopped working. Caverject for a yr. 1/2018 Tri-Mix at 30 pap/2 phent/60 pge @0.3ml, now 0.5ml 80mcg/ml PGE1. DE/Anorgasmia setting in since 5/2019, worse now.

Robert66
Posts: 688
Joined: Thu Dec 28, 2017 10:39 pm

Re: PGE-1 mixing quantity

Postby Robert66 » Mon Oct 22, 2018 12:19 am

Stew52 wrote:Assuming you are doing all the math correctly, 40 mcg of PGE1 injected is pretty dang stout. Caverject, a PGE1 product comes in 10, 20 and 40 mcg syringes. I needed about 30 mcg to produce a hard boner, 10 mcg, my start, was ineffective and 20 marginal. The 30 mcg produces a bretty god burn in me also. Tri-Mixes typically have a dose of PGE1 of 20 mcg/ml and a typical dose of say 0.2-0.4 ml. That is only about 4-8 mcg of PGE1 together with the papavatrine and phentolamine. Some have higher PGE1, up to 100 mcg/ml but those guys report using a far lower dose. Ask around.

Frankly I'd recheck my math first. If correct, Id question the efficacy of the PGE1 powder. If all of that is good then Mono-MIx may not be effective or you need to ramp it up all UNDER your doctor's guidance. You are getting on thin ice.



I have the same problem mixed 100 units of sterial water to my mix and even 32 was a so so thinking the mix is fake so much drama to get a frigving batch of tri mix
edex and tri mix 45/1/27 26 units

aussiemale
Posts: 2
Joined: Wed Oct 17, 2018 5:33 pm

Re: PGE-1 mixing quantity

Postby aussiemale » Mon Oct 22, 2018 7:03 pm

Leaning towards thinking it is a bad batch.
My main question is does it lose its efficiency if diluted as a weaker mix IE 50mcgs to 1ml bac water compared to 50mcgs to 50 mcgs Bac water?

User avatar
Stew52
Posts: 375
Joined: Fri Apr 13, 2018 4:22 pm
Location: Central TX

Re: PGE-1 mixing quantity

Postby Stew52 » Mon Oct 22, 2018 7:45 pm

There has been some conjecture here as to which is more effective: a lower mix strength and higher volume dose, or a higher mix strength and lower volume dose, yielding the same mcg of chemical. Seems to me like a higher volume MAY make better contact with cavernosal tissue. But lots of guys get stronger mixes to use far less volume per injection and say it works just fine. Feel free to test and conjecture.
NOT an MD. 72, M52 yrs, CenTX US. Inj since 12/2016, a yr after pills stopped working. Caverject for a yr. 1/2018 Tri-Mix at 30 pap/2 phent/60 pge @0.3ml, now 0.5ml 80mcg/ml PGE1. DE/Anorgasmia setting in since 5/2019, worse now.

User avatar
bldoink
Posts: 3920
Joined: Mon Apr 03, 2017 12:58 am
Location: Fl.

Re: PGE-1 mixing quantity

Postby bldoink » Tue Oct 23, 2018 6:03 pm

aussiemale wrote:Leaning towards thinking it is a bad batch.
My main question is does it lose its efficiency if diluted as a weaker mix IE 50mcgs to 1ml bac water compared to 50mcgs to 50 mcgs Bac water?
The stuff I get is 80 mcg per ml.
R.R.P 2011 Mayo Jacksonville, Dr. M. Wehle. Not nerve sparing. C in margins. Radiation 2023, V.E.D, Viagra and PGE-1 (80mcg/ml) injections @ 8 - 14 units. Originally Edex20, then compounded PGE due to cost. Inject. 12 yrs. It works. Treasure coast of FL.

User avatar
Stew52
Posts: 375
Joined: Fri Apr 13, 2018 4:22 pm
Location: Central TX

Re: PGE-1 mixing quantity

Postby Stew52 » Tue Oct 23, 2018 7:32 pm

bldoink wrote:The stuff I get is 80 mcg per ml.
How much do you typically inject on top of the 50 mg Viagra?
NOT an MD. 72, M52 yrs, CenTX US. Inj since 12/2016, a yr after pills stopped working. Caverject for a yr. 1/2018 Tri-Mix at 30 pap/2 phent/60 pge @0.3ml, now 0.5ml 80mcg/ml PGE1. DE/Anorgasmia setting in since 5/2019, worse now.

User avatar
bldoink
Posts: 3920
Joined: Mon Apr 03, 2017 12:58 am
Location: Fl.

Re: PGE-1 mixing quantity

Postby bldoink » Wed Oct 24, 2018 2:04 am

Stew52 wrote:How much do you typically inject on top of the 50 mg Viagra?

8 to 15 units depending on plans. Maybe a little more after it's getting towards 6 months old. I've done higher doses to get a little bigger and harder but it seems to work better (my dick) when on a dose a little off maximum.
R.R.P 2011 Mayo Jacksonville, Dr. M. Wehle. Not nerve sparing. C in margins. Radiation 2023, V.E.D, Viagra and PGE-1 (80mcg/ml) injections @ 8 - 14 units. Originally Edex20, then compounded PGE due to cost. Inject. 12 yrs. It works. Treasure coast of FL.

User avatar
Stew52
Posts: 375
Joined: Fri Apr 13, 2018 4:22 pm
Location: Central TX

Re: PGE-1 mixing quantity

Postby Stew52 » Wed Oct 24, 2018 11:05 pm

So 80 mcg/ml x 0.15 ml = 12 mcg (kicked up with 50 mg Viagra.). That's a pretty low dose of pure PGE1. That's about the dose of PGE1 many use with Tri-Mix and that is boosted with the papavarine and phentolamine. I was doing close to 30+ mcg of Caverject. Like I said, this guy should get a reaction with a 40mcg dose. Time to see the Dr or pharmacist.
NOT an MD. 72, M52 yrs, CenTX US. Inj since 12/2016, a yr after pills stopped working. Caverject for a yr. 1/2018 Tri-Mix at 30 pap/2 phent/60 pge @0.3ml, now 0.5ml 80mcg/ml PGE1. DE/Anorgasmia setting in since 5/2019, worse now.


Return to “Injections”

Who is online

Users browsing this forum: No registered users and 47 guests