Quadmix
-
- Posts: 132
- Joined: Sun Aug 04, 2013 12:38 pm
- Location: Denver, NC
- Contact:
Re: Quadmix
well I finally got a chance to try on new cock ring. I injected 10 units quadmix 120/30/3 and then slipped in both testicles easily and pulled penis through. Was very comfortable and as the cock started to get erect it still felt comfortable as it tightened around the balls. I was also surprised how easy it was to remove and as I have mentioned in previous posts I have bad case of venous leakage but it did keep me 85% hard and hard enough for penetration .
- Attachments
-
- 1 min after injection
- My Snapshot_11.jpg (24.52 KiB) Viewed 2045 times
-
- 5 min after injection
- My Snapshot_12.jpg (20.48 KiB) Viewed 2045 times
-
- 8 min after injection
- My Snapshot_13.jpg (22.07 KiB) Viewed 2045 times
WM 69 6'2" 192lbs, https://www.xtube.com/profile/leesburg2013-28635222 Quadmix injections PG/PA/PH/AT (70MCG/30MCG/3MG/0.15MG)ML Love Showers: http://www.silverdaddies.com/1511803
Re: Quadmix
Great lee, looks good. 85% would be great! Do you have any scaring. My dick has hardness in the middle from injecting. I'm wondering if this is not causing issues. They uro didn't seem to think it was that bad. I put back on 2 more o rings on each side of my horse shoe ring. Want to try it out tonight, but I injected last night so I'm a little ambivalent about it. I got my quadmix, and tried it last night. Got about 70% without a ring.
Ed (sliphill) 68
Implanted by Dr. Michael O'Neill in Charlotte, NC on 6/9/2017 with AMS 700LGX. 18 cm cylinders 3 cm RTE's.
Revision done by Dr. Maxim McKibbon in Charlotte, NC on 4/12/2023 with AMD 700 LGX 22 cm cylinders gm
Implanted by Dr. Michael O'Neill in Charlotte, NC on 6/9/2017 with AMS 700LGX. 18 cm cylinders 3 cm RTE's.
Revision done by Dr. Maxim McKibbon in Charlotte, NC on 4/12/2023 with AMD 700 LGX 22 cm cylinders gm
Re: Quadmix
leesburg2013 wrote:well I finally got a chance to try on new cock ring. I injected 10 units quadmix 120/30/3 and then slipped in both testicles easily and pulled penis through. Was very comfortable and as the cock started to get erect it still felt comfortable as it tightened around the balls. I was also surprised how easy it was to remove and as I have mentioned in previous posts I have bad case of venous leakage but it did keep me 85% hard and hard enough for penetration .
Lee, can I buy one of these from you. This ring looks like it does the job!
Ed (sliphill) 68
Implanted by Dr. Michael O'Neill in Charlotte, NC on 6/9/2017 with AMS 700LGX. 18 cm cylinders 3 cm RTE's.
Revision done by Dr. Maxim McKibbon in Charlotte, NC on 4/12/2023 with AMD 700 LGX 22 cm cylinders gm
Implanted by Dr. Michael O'Neill in Charlotte, NC on 6/9/2017 with AMS 700LGX. 18 cm cylinders 3 cm RTE's.
Revision done by Dr. Maxim McKibbon in Charlotte, NC on 4/12/2023 with AMD 700 LGX 22 cm cylinders gm
-
- Posts: 132
- Joined: Sun Aug 04, 2013 12:38 pm
- Location: Denver, NC
- Contact:
Re: Quadmix
No problem I have done this before. Have check the exact name/cost since my buddy just sends them to me. Will get back to you or all soon.
WM 69 6'2" 192lbs, https://www.xtube.com/profile/leesburg2013-28635222 Quadmix injections PG/PA/PH/AT (70MCG/30MCG/3MG/0.15MG)ML Love Showers: http://www.silverdaddies.com/1511803
-
- Posts: 132
- Joined: Sun Aug 04, 2013 12:38 pm
- Location: Denver, NC
- Contact:
Re: Quadmix
Well I found the name and doing a Google search seem the cheapest place is Amazon --> ULTRA DNA Stainless Steel Male Cock Ring Penis Loop 1.5/1.75"/2". Around $14 - a little more than I paid since mine was free
WM 69 6'2" 192lbs, https://www.xtube.com/profile/leesburg2013-28635222 Quadmix injections PG/PA/PH/AT (70MCG/30MCG/3MG/0.15MG)ML Love Showers: http://www.silverdaddies.com/1511803
Re: Quadmix
leesburg2013 wrote:Well I found the name and doing a Google search seem the cheapest place is Amazon --> ULTRA DNA Stainless Steel Male Cock Ring Penis Loop 1.5/1.75"/2". Around $14 - a little more than I paid since mine was free
Thanks, I ordered one.
Ed (sliphill) 68
Implanted by Dr. Michael O'Neill in Charlotte, NC on 6/9/2017 with AMS 700LGX. 18 cm cylinders 3 cm RTE's.
Revision done by Dr. Maxim McKibbon in Charlotte, NC on 4/12/2023 with AMD 700 LGX 22 cm cylinders gm
Implanted by Dr. Michael O'Neill in Charlotte, NC on 6/9/2017 with AMS 700LGX. 18 cm cylinders 3 cm RTE's.
Revision done by Dr. Maxim McKibbon in Charlotte, NC on 4/12/2023 with AMD 700 LGX 22 cm cylinders gm
Re: Quadmix
Ok, finally, success with a ring. And its comfortable too. I used a 1.5" metal one. It seems the 1.75" one wasn't tight enough. I still have a stiffy after 30 minutes. How do I get it off cause I'm still erect? I'm thrilled. It's about 90%, pointing up a little. I can't leave this on much longer. Anyone know how to get one off when erect.
Ed (sliphill) 68
Implanted by Dr. Michael O'Neill in Charlotte, NC on 6/9/2017 with AMS 700LGX. 18 cm cylinders 3 cm RTE's.
Revision done by Dr. Maxim McKibbon in Charlotte, NC on 4/12/2023 with AMD 700 LGX 22 cm cylinders gm
Implanted by Dr. Michael O'Neill in Charlotte, NC on 6/9/2017 with AMS 700LGX. 18 cm cylinders 3 cm RTE's.
Revision done by Dr. Maxim McKibbon in Charlotte, NC on 4/12/2023 with AMD 700 LGX 22 cm cylinders gm
Re: Quadmix
sliphill wrote:Ok, finally, success with a ring. And its comfortable too. I used a 1.5" metal one. It seems the 1.75" one wasn't tight enough. I still have a stiffy after 30 minutes. How do I get it off cause I'm still erect? I'm thrilled. It's about 90%, pointing up a little. I can't leave this on much longer. Anyone know how to get one off when erect.
Great! That's why I like the band I use which unsnaps when you're hard. I told you about that one already.
Re: Quadmix
rahod1 wrote:sliphill wrote:Ok, finally, success with a ring. And its comfortable too. I used a 1.5" metal one. It seems the 1.75" one wasn't tight enough. I still have a stiffy after 30 minutes. How do I get it off cause I'm still erect? I'm thrilled. It's about 90%, pointing up a little. I can't leave this on much longer. Anyone know how to get one off when erect.
Great! That's why I like the band I use which unsnaps when you're hard. I told you about that one already.
That one didn't work for me as I tried it again. So I went with this metal ring. Last time I tried this ring, I tried to put it on without lube. I struggled and just gave up. But seeing Lee having success with this type of ring gave me hope that it would work for me. I have been literally months trying to figure the rings thing out. I found out that the right size is key! So tonight, Finally after two hours it went down and I easily removed the ring. I didn't have any sudafed on hand otherwise I would have taken some.Will make sure I have it for next time.
On another note, would it be ok to inject tomorrow?
Ed (sliphill) 68
Implanted by Dr. Michael O'Neill in Charlotte, NC on 6/9/2017 with AMS 700LGX. 18 cm cylinders 3 cm RTE's.
Revision done by Dr. Maxim McKibbon in Charlotte, NC on 4/12/2023 with AMD 700 LGX 22 cm cylinders gm
Implanted by Dr. Michael O'Neill in Charlotte, NC on 6/9/2017 with AMS 700LGX. 18 cm cylinders 3 cm RTE's.
Revision done by Dr. Maxim McKibbon in Charlotte, NC on 4/12/2023 with AMD 700 LGX 22 cm cylinders gm
Who is online
Users browsing this forum: No registered users and 11 guests