Ring type with the VED

Specific talk about pumps: Questions, hints, recommendations, etc.
User avatar
Dogmeat
Posts: 23
Joined: Thu May 31, 2012 11:11 am

Ring type with the VED

Postby Dogmeat » Mon Aug 20, 2012 3:29 pm

I was wondering whether it is possible/safe to use an all around (cock and balls) ring with the VED for creating a usable erection?
Has anyone done this?

User avatar
Bionic_by_AMS
Posts: 574
Joined: Wed Apr 04, 2012 2:59 pm
Location: NJ

Re: Ring type with the VED

Postby Bionic_by_AMS » Mon Aug 20, 2012 4:53 pm

Dogmeat,
Sure rings are fine to use ... however "rule-of-thumb" is usually no more than 30 min. or if the head feels cold to the touch. Then remove, stimulate for blood flow and repeat as necessary ...
Robotic Prostrate surgery - Dec. 2011 - AMS 700 LGX Implant - 21 cm/3 cm RTE - June 2012

User avatar
Dogmeat
Posts: 23
Joined: Thu May 31, 2012 11:11 am

Re: Ring type with the VED

Postby Dogmeat » Mon Aug 20, 2012 5:01 pm

Thanks AMS, I mean is it possible to get a seal with this type of ring on. I tried but couldn't get a seal.
If the ring has to be snapped off the end of the VED, how would this be done? You can't fold the ring into the VED like you can if it was put on infront of your balls.

dtwarren1942
Posts: 1909
Joined: Wed Oct 27, 2010 7:58 pm
Location: Jersey Shore

Re: Ring type with the VED

Postby dtwarren1942 » Mon Aug 20, 2012 11:01 pm

You will not be able to get a good seal with the ring also behind your balls. If you want to use a full package ring, you will have to slip it on after you exit the tube. However, be sure to use a lot of lube. The constriction will also increase the size of your scrotum which is a nice feeling. You should also kegel in some more blood once you slip on the constriction in order to replace the blood that escapes once you exit the cylinder until you add the constriction.
Age 81
Diabetic
Pumping
Started Trimix injections 8/'11

User avatar
Bionic_by_AMS
Posts: 574
Joined: Wed Apr 04, 2012 2:59 pm
Location: NJ

Re: Ring type with the VED

Postby Bionic_by_AMS » Tue Aug 21, 2012 2:36 am

Dogmeat wrote:Thanks AMS, I mean is it possible to get a seal with this type of ring on. I tried but couldn't get a seal.
If the ring has to be snapped off the end of the VED, how would this be done? You can't fold the ring into the VED like you can if it was put on infront of your balls.

Sorry ... I misread your first post a little ... I agree with dtwarren1942 in that you will not be able to use a combo ring with the VED ...
Robotic Prostrate surgery - Dec. 2011 - AMS 700 LGX Implant - 21 cm/3 cm RTE - June 2012

JimStars
Posts: 844
Joined: Sun Jan 24, 2010 2:41 pm

Re: Ring type with the VED

Postby JimStars » Tue Aug 21, 2012 8:03 am

Dog,

There's no reason you cannot just use a regular ring on the VED to the shaft first (to safeguard the pumped E after removing the cylinder). After that, throw on the full body ring around balls and everything. Even keep both on at same time for best hardness?

Sounds like a good plan?

J
RP 2008 ... MUSE 2008-9 .. TriMix Gel 2009 .. Trimix 2009-2015 ... PGE-1 2016-2019 ..Misoprostal 2019 Onward. All worked.

User avatar
Dogmeat
Posts: 23
Joined: Thu May 31, 2012 11:11 am

Re: Ring type with the VED

Postby Dogmeat » Tue Aug 21, 2012 10:25 am

Thanks for all your input guys.

I will have to show my uro and check whether that big vein is something I can just 'grin and bare' or whether caution needs to be exercised.
I will try the penile foam sleeve regardless. It might prove to be the missing link.
I will also try all suggestions.

thanks again!!


Return to “Pumps (Vacuum Erection Device)”

Who is online

Users browsing this forum: No registered users and 58 guests